-
Ashpit Door
Drop this cast iron door into the bottom of your fireplace so you can sweep away the ashes. The Ashpit Door fits a 4.5" x 9" opening. The outside dimension is approximately 5.375" x 9.5". -
ChimneySavers PWR Powdered Water Repellent
Save money by adding PWR to mortar/concrete mixes for all your repairs, tuckpointing, and rebuilds! Adding our Powdered Water Repellent (PWR) makes mortar/concrete permanently waterproof. This means no return trip to waterproof the chimney. When tuckpointing, just add PWR to your mortar mix. When... -
ChimneySaver Water Repellent
According to the Brick Industry Association, chimneys require special attention and maintenance to prevent costly damage caused by water penetration. Because chimneys project above the roof line, they are vulnerable to the elements. Nearly every chimney you encounter has signs of water damage! The... -
SaverSystems CrownSaver
CrownSaver is our original crown repair product that was developed in the early 80s. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent. For best results, cover the... -
HeatShield Cerfractory Foam Smoke Chamber Sealant
Your masonry fireplace has an area called the smoke chamber. In most fireplaces it can be easily viewed by shining a strong light up through the damper. Its function is to safely transition smoke and hot gases from your fireplace to the narrow flue... -
Rutland Fireplace Mortar
Our fireplace mortar is perfect for repairing small chips or cracked firebrick, re-pointing mortar joints between firebricks, and bonding firebricks together. Available in three colors, it is easy to apply with a caulking gun and will last for years to come. It sets as... -
Rutland Dry Mix 211
Dry Mix 211 is a refractory mortar that is ideal for joining or repairing masonry flue tile in any gas or wood fireplace and wood, coal, or pellet stove chimney. Just add water, mix, and trowel on to seal and join flue tiles. It... -
Pellet Rods
This Pellet Rod is made for your pellet liner with a PVC construction 1/4" in diameter it allows the 3 or 4" brush to maneuver with ease. Each pellet rod is 5 foot in length. Thread size is 1/4-20.

