Flexible Stainless Steel Chimney Liner Components | Made in USA – Page 2

Flexible Liner Components

Here you will find all the components needed to make your flexible chimney liner installation successful. Ranging from adjustable elbows, tee connectors, offset adapters, flue extensions, insert boots, increase-reducers, and many other chimney liner parts and connectors, making your job easier to connect your stainless steel flexible chimney liner from top to bottom.

316 Adjustable Flexible Liner Elbow

Our Adjustable 316 stainless steel elbow pipe is good for solid fuel applications (Wood, Coal & Pellet) and is available in 3" through 8" diameter and in 30, 45, 60 and 90 degree angles. Purchase this adjustable flue pipe elbow and other parts online...
304 Male/Female Coupler

Male/Female Coupler - Made of 304 stainless steel for wood burning applications. Unlike the easy coupler, this connector will require the use of screws or rivets during installation.
304 Increaser/Reducer
304 Stainless Steel 2-Part Chimney Flex Tee for Solid Fuels

When venting a wood-burning stove or solid fuel fireplace, you need a heavy-duty connection that can withstand extreme temperatures without breaking the bank. Our 304 Stainless Steel 2-Part Flex Tee is engineered explicitly for solid-fuel applications. It provides the same commercial-grade structural integrity and...
304 Bottom Plate with Screen

Bottom Plate with Screen
Top Kit Extension 18in or 24in 304 Stainless Steel

The Top Kit Extension is a rigid section that can be used to extend the height of your flex liner system. The extension attaches between the Top Plate and the Rain Cap. It is manufactured using 24ga 304 stainless steel and utilizes an EZ...
304 Flat Deluxe Top Kit

Fireside's Hinged Deluxe Top Kit is used for flat top plate installations. Not used for a clay tile top termination. Use Tapcon or masonry screws to attach. Use with flexible chimney liners only. For other sizes not listed here, please call us for pricing.
304 Insert Offset Adapter

This Insert Offset Adaptor is made with 24 gauge 304 stainless steel. This two piece design allows for front to back or side to side movement in the firebox. It will accommodate a horizontal offset from 0" to 9" without the added clearance required...
304 Insert Boot

The Insert Boot is manufactured with 24gauge 304 stainless steel. Designed to attach rigid liner or FireFlex flexible liner with an appliance connector to the exhaust vent of most inserts. This boot measures 10"W x 16"L x 4" H with a 2" collar.
304 Fixed Flexible Liner Elbow

Our Fixed 304 stainless steel elbow pipe is good for solid fuel applications (Wood, Coal & Pellet) and is available in 3" through 8" diameter and in 15, 30, 45, 60 and 90 degree angles. Purchase this fixed flue pipe elbow and other parts...
316 Universal Gas Take-off

The Universal Gas Take-off component would be used to connect a water heater or other gas appliances to a FireFlex chimney liner. The connection would be made above the appliance. The use of RTV red silicone sealent at the connection site is recommended.
304 Extended Tee Snout

MADE OF 304 STAINLESS STEEL When you need a snout longer than the standard 10" snout - we can help. We have snouts in either 18" or 24" lengths. Simply just cut to the length needed. Fireside rigid lining systems are constructed of high...