Top Mount Hip and Ridge Multi Flue Hinged Chimney Cap

All top mount or outside mount chimney caps are manufactured with 304 stainless steel or copper and come complete with easy to install instructions and LIFETIME WARRANTY. The sturdiest most durable cap on the market.

PLEASE ORDER IN WHOLE NUMBERS ONLY

Next Approximate Ship Date 1/6 - 1/10

OVERSIZED CAPS >60" Next Approximate Ship Date 1/6 - 1/10

In stock
SKU
HRPAMF
545.00

Shipping to a Residential Address requires an extra charge. Shipping companies will only deliver to a Residential Address if they send a delivery truck that is equipped with a liftgate.  To save any additional shipping charges, please consider having your order shipped to a commercial address if at all possible. Thank you.

Fireside Chimney Supply carries the largest variety of multi flue caps in the industry. These multi flue caps are installed on the top of the chimney cap and have a hinged base that can be used for mounting to the chimney cap. If measuring from the outside dimension of the chimney please subtract 3" from the length measurement and 3 " from the width measurement to allow for the top mount hinge. These multi flue caps have a top mount design that will easily attach to the top of the chimney crown or brick with adhesive and tapcons (included with each cap). This style of multi flue has the unique look of a hip and ridge top. The Hip and Ridge top has a Standard 10/12 Pitch with a Standard Overhang of 3 3/4". Other Options Available

It is recommended that a 6" minimum clearance from top of the flue tile, liner or chimney to the cap lid be followed for proper drafting. Fireside chimney supply offers five different heights of screen for this accommodation. We have screen heights in five different sizes: 8", 10", 12", 14" and 16".

Whether you are ordering one Multi Flue for your home or you are ordering 50 for your job site or community project....."no job is too big or too small". Discounts on orders of 5 or more Multi Flue covers. Call for details.

As the Hip and Ridge Pitch (w/Std. Overhang) increases, it will decrease the height of the screen.

Example: A 3/12 Pitch on a Hip and Ridge Multi Flue will decrease the screen height by .908”.

Using a Std. Overhang of 3.75”           Using an Overhang of 5.00”                                 

3/12 Pitch =  -.908”                          3/12 Pitch =  -1.21”

4/12 Pitch =  -1.19”                          4/12 Pitch =  -1.59”

5/12 Pitch =  -1.44”                          5/12 Pitch =  -1.91”

6/12 Pitch =  -1.67”                          6/12 Pitch =  -2.23”

7/12 Pitch =  -1.89”                          7/12 Pitch =  -2.52”

8/12 Pitch =  -2.08”                          8/12 Pitch =  -2.78”

9/12 Pitch =  -2.26”                          9/12 Pitch =  -3.01”

10/12 Pitch = -2.41”                         10/12 Pitch =  -3.21”

11/12 Pitch = -2.53”                         11/12 Pitch =  -3.38”

12/12 Pitch = -2.65”                         12/12 Pitch =  -3.54”